Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Fireplace Services in Clifton: What to Know First
Olympia Chimney fireplace services in Clifton typically run between $220 for a gas fireplace cleaning and basic service call up to $1,800 for a full firebox rebuild or damper replacement, with most repair jobs landing in the $400-$900 range. We’re an independent Olympia Chimney service provider - not affiliated with or authorized by the manufacturer - and we complete most fireplace repairs in one visit once parts are on the truck. If you own an Olympia Chimney fireplace, insert, or venting system and something isn’t working right, call (551) 282-9640 and we’ll give you a written price before anyone starts.
This page is for Clifton homeowners who already own an Olympia Chimney product and want to know what’s actually wrong with it, what it costs to fix, and whether it’s worth repairing. We’ve worked on Olympia equipment across Passaic County for years, and we see the same failure patterns repeat. Below is exactly what we find, how we fix it, and what you should expect to pay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
Olympia Chimney makes solid mid-range fireplace and venting components. But every brand has weak points, and Olympia’s show up in predictable ways in Clifton’s older housing stock. Here are the five failure modes we fix most often:
- Olympia stainless steel liner perforation at the first flue tile joint. In homes built before 1990, we regularly see Olympia liners corroding at the tile transition point, especially on exterior chimneys. The cause is almost always condensation from an oversized flue. The fix is a properly sized DuraFlex or Olympia replacement liner, not a patch. Patching a perforated liner buys you one season at most.
- Firebox refractory panel cracking on Olympia zero-clearance units. The refractory panels in Olympia factory-built fireplaces crack from thermal cycling after 10-15 years. We see it constantly in Athenia and Richfield homes where the fireplace became a primary heat source. Hairline cracks are usually cosmetic. Panels with displaced sections or gaps behind them need replacement. We source OEM-equivalent refractory panels where available and quality aftermarket where the OEM line has been discontinued.
- Damper seizure on Olympia top-seal dampers. Top-seal dampers mount at the flue crown and seize when rain water plus soot creates a paste that locks the cable mechanism. The Bracken Hill and Rosemawr areas have older chimneys with porous crowns, which makes this worse. We free the mechanism when possible and replace the damper assembly only when the cable housing is cracked or the plate warped.
- Gas log set burner tube clogging on Olympia vented gas logs. Clifton’s water has enough mineral content that spider grit and mineral residue clog burner ports faster than you’d expect. The symptom is uneven flame and a faint gas smell. We pull the log set, clean the burner ports with the correct gauge tool, and check the thermocouple and pilot assembly in the same visit.
- Smoke spillage from undersized Olympia chimney caps. We see Olympia caps installed too small for the flue cross-section, usually during a flip renovation. The cap restricts draft and forces smoke back into the room. The fix is a correct-sized cap with proper mesh rating, not an expensive rebuild.
Our Olympia Chimney Fireplace Services Process

When you call about an Olympia Chimney fireplace in Clifton, here’s how it goes:
- 1
You call and describe the symptom. We ask what you’re seeing: irregular flame, smoke in the room, a damper that won’t move, visible cracks in the firebox. We schedule based on what you tell us, no phone tag.
- 2
We arrive, ran the camera down the flue. Every visit includes a camera-scan inspection, NFPA 211 Level 2. We don’t guess, and we don’t sell work based on a flashlight peek. The camera shows us and you exactly what’s happening.
- 3
You get a written price and scope. Before any tool touches your fireplace, you get a written price, a written scope of work, and a written warranty. That’s Clause 1 of the Haven Standard, and it’s been our default since 2009.
- 4
We decide on OEM or aftermarket parts together. Some Olympia parts are still available OEM. Some lines were discontinued years ago and quality aftermarket is the only real option. We show you the cost difference and the trade-off. You decide.
- 5
We complete the repair and test it. Gas fireplaces get a full safety check including gas pressure, thermocouple millivolt reading, and CO test at the damper. Wood burning fireplaces get a draft test and a burn test.
- 6
You walk away with a documented photo record. Before and after photos, camera footage of the flue, and a written receipt with warranty terms. That documentation practice runs continuously since 2009 - it’s Clause 4 of the Haven Standard.
Before
AfterWhat Olympia Chimney Fireplace Services Costs in Clifton
Real numbers for the jobs we do most in Clifton:
| Service | Typical Cost (Parts + Labor) |
|---|---|
| Gas fireplace cleaning & service call | $220-$320 |
| Wood burning fireplace sweep & inspection | $240-$350 |
| Damper replacement (top-seal) | $420-$680 |
| Firebox refractory panel replacement | $390-$590 per panel |
| Burner assembly replacement (vented gas logs) | $380-$650 |
| Full chimney cap replacement | $290-$480 |
| Fireplace conversion (wood to gas or gas to wood) | $1,100-$2,400 |
What moves the price: parts availability, the condition of what’s behind the visible problem, and whether your chimney needs work beyond the fireplace itself. We never bundle surprises into the invoice. If the camera shows you need more than the fireplace repair, you’ll see it before you pay for it. Call (551) 282-9640 for a free estimate - and that estimate is written, not verbal.
Why Clifton Homeowners Call Level Two Chimney Clifton for Olympia Chimney Work

Clifton homeowners call us because we show our work. Every Olympia Chimney job gets the same documented approach as every other job: camera down the flue, written price in hand before anything moves, and a photo record when we’re done. Corrine Halstead runs our Clifton crew, and she’s been working chimneys across the metro area since her CUNY Kingsborough building trades years. The camera doesn’t guess. Neither do we.
If an Olympia part is discontinued or backordered, we can pull from DuraFlex, HeatShield, or Gelco to get you a repair that actually lasts. We’re independently owned and operated under the Haven Standard, which means our 365-Day Done Right Promise applies to every Olympia Chimney repair we touch. We answer our phones live, 24/7, and we arrive on schedule with a named technician and a text when we’re on the way.
FAQs
No. Independently performed service on your Olympia Chimney fireplace does not void the manufacturer warranty, as long as the work doesn’t involve unauthorized modification to the unit. We install OEM parts where they’re available and follow all manufacturer specifications for clearances, gas pressure, and venting. Your documented report from us is evidence the work was done correctly, not against you.
Most common Olympia Chimney fireplace parts - burners, thermocouples, pilot assemblies, dampers - are available locally within 3-5 business days. Discontinued Olympia lines may take 2-3 weeks if we need to source aftermarket equivalents through our supplier network. We’ll tell you the timeline before any work begins, in writing.
The general rule is: if the firebox shell is intact and the repair cost is under half the price of a comparable new unit, repair is the smart play. We’ve kept Olympia fireplaces in Clifton running for 20-plus years with regular maintenance and the right parts. If the firebox is cracked through or the unit leaks combustion gases, replacement becomes the honest recommendation - and we’ll show you the camera footage to prove it.
Gas fireplaces develop clogged burner ports and faulty thermocouples, leading to uneven flame and potentially unsafe gas operation. Wood burning fireplaces build Class III creosote, which is the kind that glazes over and becomes a chimney fire waiting to happen. We can tell the difference between normal buildup and a problem on the camera. Call (551) 282-9640 if you haven’t had your Olympia fireplace looked at in over a year, and we’ll give you a written price for whatever we find.
Written by Corrine Halstead, Owner, Level Two Chimney Clifton at Level Two Chimney Clifton, serving Clifton and nearby areas.





Before
After
Before
After