Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Repair in Clifton: What to Know First
Olympia Chimney chimney repair in Clifton typically runs $425 to $2,800 depending on whether we’re repointing mortar, replacing a rusted cap, or rebuilding a spalled brick crown. Most repair jobs are completed in one visit, and we hand you a written price before any work starts. If you own a home in Clifton with an Olympia Chimney system and you’ve spotted water stains, cracked mortar, or a cap that’s seen better days, this page tells you exactly what we look for and what it costs to fix. Call (551) 282-9640 for a free estimate.
We’re Level Two Chimney Clifton, an independent Olympia Chimney service provider. We are not affiliated with or authorized by Olympia Chimney. What we are is a crew that has inspected and repaired enough Olympia systems across Clifton – from the Dutch Hill section down to the Athenia neighborhood – to know exactly how this brand ages in northeast New Jersey weather.
Key Takeaways
- Olympia Chimney repair in Clifton: $425 to $2,800, written price before work starts
- Every job includes a camera-scan inspection and documented photo record (Haven Standard Clause 4)
- We repair all Olympia Chimney lines, with parts sourced from DuraFlex, HeatShield, Gelco, and Copperfield
- 365-Day Done Right Promise: if it’s not done right, we make it right
- Call (551) 282-9640 for a free estimate – always in writing, never verbal
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia standardized masonry chases and the crown-jacket problem. Many Olympia Chimney installations in Clifton use a prefabricated chase with a metal crown jacket. After six to eight winters of freeze-thaw cycles, that jacket’s welded corners start separating from the brick lip. Water gets behind it, runs down the chase interior, and you get efflorescence on the drywall inside the house before you ever see it outside. Our fix: remove the jacket, inspect the chase framing, install a properly flashed replacement crown, and document the interior before we close it up.
- Rusted Olympia multi-flue caps on older masonry chimneys. Olympia’s standard galvanized multi-flue cap does its job until the mesh screen gets clogged with creosote or debris, then it traps moisture against the flue tile. We regularly pull Olympia caps in Clifton homes where the screen has rusted through in under five years. We replace with stainless steel from Copperfield or Famco, and we show you the old cap on camera before it goes in the truck.
- Mortar joint failure at the smoke chamber-to-flue transition. This is the one we see most on Olympia Chimney-built masonry fireplaces in the Weasel Brook and Albion sections. The transition from the smoke chamber to the flue liner is parged with refractory mortar, and Olympia systems from the mid-2000s used a mortar mix that spalls under repeated heating. You’ll see sand and mortar crumbs in the firebox after a hot fire.
- Chase flashings and cricket issues on homes off Grove Street. Clifton’s older stock has steep pitches, and an Olympia chimney penetrating toward the ridge without a cricket diverts water straight down the flashing seam. We install a copper or aluminum cricket as part of the repair, not as an add-on we pitch after the fact. The written scope covers it up front.
- Class III creosote buildup concentrated on Olympia’s stainless liners in oil-to-gas conversions. When a Clifton homeowner converts from oil to gas and keeps the original Olympia liner, we sometimes find the liner wasn’t sized for the lower flue-gas temperature of the new gas unit. The result is accelerated creosote condensation near the top of the flue. We camera-scan it, document the creosote class, and recommend the correct reline if the liner’s diameter is the root cause.
BeforeAfterOur Olympia Chimney Chimney Repair Process
- 1
You call (551) 282-9640. A live person answers, 24/7. We take down your address, what you’re seeing, and whether the fireplace is gas, oil, or wood.
- 2
Camera-scan inspection. We run an NFPA 211 Level 2 camera inspection down the flue, photograph the crown, chase, and flashing, and document everything. If it’s an Olympia system, we look specifically at the known failure points: crown jacket seams, cap screen, smoke chamber transition, and flashing.
- 3
Written scope and price. We hand you a written description of what the camera found, the exact repair we recommend, what it costs, and what parts we’ll use – OEM where it matters, quality aftermarket from DuraFlex, HeatShield, Gelco, or Copperfield where it’s the better fix.
- 4
The repair. We do the work with background-checked, uniformed techs. You get a text when we’re on the way. The job is done in one visit unless the scope calls for a rebuild or liner replacement.
- 5
Photo record and warranty. Before we leave, you get a documented photo record of the completed repair – before, during, after. Your written warranty is included. The 365-Day Done Right Promise covers it: if it’s not done right, we make it right.
- 6
Cleanup. We leave the hearth, firebox, and surrounding floor cleaner than we found them. That’s standard, not an upsell.
What Olympia Chimney Chimney Repair Costs in Clifton
| Repair | Typical Clifton Range |
|---|---|
| Mortar repointing (smoke chamber or brick) | $425 – $900 |
| Spalling brick repair (crown or chase) | $550 – $1,200 |
| Flashing repair or replacement | $600 – $1,400 |
| Chimney waterproofing treatment | $450 – $850 |
| Chimney cap replacement (stainless, Copperfield/Famco) | $375 – $750 |
| Partial chimney rebuild | $1,800 – $2,800+ |
| Flue liner replacement (DuraFlex or Gelco stainless) | $1,500 – $3,500 |
What moves the price: chimney height and roof access, the condition of the existing mortar joints, whether we’re working on a ladder or need a lift, and how much of the underlying brick or chase framing has to come out. You get the exact number in writing before we start, not after. Call (551) 282-9640 for a free estimate on your Olympia Chimney repair in Clifton.
Why Clifton Homeowners Call Level Two Chimney Clifton for Olympia Chimney Work
We’ve repaired Olympia Chimney systems across Clifton for several years, and our van is parked near the Athenia neighborhood as often as anywhere. The reason people call us instead of a generic sweep: we name what the camera found, state what it costs, and move on. No verbal estimates that shift by the time the invoice appears. Corrine Halstead, our owner, came up through the building trades program at CUNY Kingsborough Community College and has been writing up findings on job sites across the metro area long enough to know that evidence beats reassurance. Every Olympia job we do includes a documented photo record per Clause 4 of the Haven Standard. The 365-Day Done Right Promise is stamped on every job. And if a competitor hands you a written quote, bring it to us for a free second opinion. Materials are sourced from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – purchased through Haven’s buying network to keep your price honest. The camera doesn’t guess. Neither do we.
FAQs
We can, but the first step is determining whether the repair falls under the manufacturer’s warranty before we touch anything. We’ll help you identify the model and the failure, document it with our camera, and if it’s a warrantable defect, we’ll point you to the right Olympia Chimney claim process. If the warranty doesn’t cover it or has lapsed, we’ll give you a written scope and price to fix it ourselves. Call (551) 282-9640 and we’ll walk through it with you.
Where an Olympia-brand part is the right call – certain chase crowns, cap brackets, and proprietary components – yes. But on many repairs, a quality aftermarket part from Copperfield, Famco, DuraFlex, or Gelco performs better and costs less, and we’ll tell you that plainly and show you both options in writing. We never install a part just because it carries the manufacturer’s name if a better option exists.
Most repointing, cap replacement, and flashing jobs are completed in one visit, which we can usually schedule within a few days depending on the season and weather. Rebuilds and liner replacements take longer and may require a second visit. We’ll give you a clear timeline in the written scope. Call (551) 282-9640 for a free estimate.
Depends on what the camera shows. If the flue liner is intact, the mortar joints are sound, and the only issues are spalling brick and rusted caps, repair is the honest call. If the liner is compromised or the chase framing is rotted, a rebuild or reline is sometimes cheaper than repeated patches. We’ll show you the camera footage and recommend the option that makes sense, not the one that makes us more money.
Water is the first thing that gets in, then freeze-thaw cycles widen the cracks, then you’re looking at brick spalls, flue-tile fragments, and eventually a liner that can’t contain combustion gases. In the worst case, that’s a chimney fire or carbon monoxide backdraft into the house. The camera doesn’t guess, and neither do we. Call (551) 282-9640 for a free estimate before a $600 repoint becomes a $2,800 rebuild.
Written by Corrine Halstead, Owner, Level Two Chimney Clifton at Level Two Chimney Clifton, serving Clifton and nearby areas.